Sunday, November 29, 2015

3 concerns to take directly into account for the house plans

When timber frame house plans flow well via 1 space to the next, anyone barely recognizes it.  When it does not, it is extremely noticeable.  Here is how to produce home plans that are seamless and flow well.

We absolutely love designing floor plans that will utilize proper space and more to make your residence much more comfortable. To achieve success when designing your current floor program it is important to take into account how the residence looks as well as how it feels.

Consider the following ideas to maximize both space and comfort.


  • The principal question to address is whether you want your home to be formal as well as informal. Privacy can easily be addressed through the usage of closed wall rooms and hallways which separate each room.
  •  How do you see oneself living within the timber frame home
  • Do you have a lot of visitors?


These ideas are some of the most critical factors in order to determine where you should place each space within your timber frame home plan. Think with regards to exactly where every room is actually and also what it really is utilized for, will it seem sensible to be able to have a kitchen found in a central area in the home? Another thing to take in to account is planning for that future. Are your kids likely to be grown as well as leaving your nest? Will you've the particular necessary space? What are you making use of the house for, can it be the permanent home?

When you are visualizing yourself inside your timber home, its also best if you consider others who might be utilizing it, and how comfortable they will feel inside your home.  It may be necessary to add open areas to ensure that visitors could gather and visit should you plan on entertaining guests along with visitors

If you take these tips in to account, they should enable you to when designing your dream timber frame residence plan, each throughout utilizing room as well as appropriate flow.

Various Traditional And Modern Uses Of Timber Frames

The width of your window jab may be a determining factor. If you have a solid brick or brick veneer or concrete block home then your window jambs will be plenty wide enough to house your blinds and not have them banging against the windows.

In contrast, seasoned oak can take up to 7 years to be ready. In that time, the wood will dry and split and release stresses. This means that the finished look is more predictable, which is why it is also known as 'steady' oak. Steady oak is becoming increasingly popular with architects for restoration projects, but also for newer builds, because the seasoning time also improves stability.

You will soon accumulate more wood than you can use. If possible, store it outside the workshop, protected from the weather, and only bring in what is needed for current projects. If you let it, the wood pile will take over the workshop, forcing you into a cramped central space. (Don't ask me how I know this). The woodpile needs discipline.

Second thing you will want to think about is the opening size you want the door to go into. Obviously this is crucial as the door must fit! Lets say the hallway is 1000mm wide (1meter). Then may want to go with a door that is 770mm, allowing enough room for the jamb and any architrave you may wish to have around the door. So if the architrave is 60mm wide you will want a little more than this each side of your door at least. For this example the 770mm door will do fine. You can choose the style of the door you wish to suit your house.

Easy to heat or cold - Simply because you will find less pieces of wood used to make the frame it becomes simpler for heating engineers to install heating and cooling systems. These homes also have fantastic insulation properties. This is because these houses have insulated exterior sheathing.

It cost Ziggy less than $500 to build the cob walls for his 200 square foot home in 2008-2009, with the clay from the Dancing Rabbit land and straw from local farmers. He learned that in Missouri the cob home is not efficient to heat since the walls remain so cold in the winter temperatures, and warm air contact with cold walls causes condensation issues. The book The Hand Sculpted House explains how to use insulation to counter this. He has since built, with his partner April, a large new timber frame home and straw bale home.

Gradually we have added more solar panels to our Home Solar Power system. We started with another small panel, about 15 watts, a small inverter, rechargeable batteries for flashlights, and a rechargeable Coleman lantern. Anything that could be recharged slowly worked fine on our small system. Right now we are in the process of upgrading our battery bank and every year we add a solar panel or two. The nice part about this arrangement is that you can start to enjoy Home Solar Power in your own home by spending very little money, and adding on as you can.

The large structural oak beams, in a fire situation char on the outside causing an insulated layer that protects the rest of the beam from burning. This is a useful property to have as it protects the building from collapse.

Mark out where you want the door to be in the hallway and build a frame using the 90mm studs, as that is the thickness of your frame. Build it so you end up with an opening that is the size of your door plus the thickness of the jamb (the lowest point where the door will sit) plus 2mm on each side, 2mm on top and 10mm bottom for clearance so the door can open and close, plus 2-4mm extra as you can pack the door jamb out later on (this is your margin for error so be exact!). The bottom clearance can be altered if need be.  For more tips on timber frame homes visit this site

timber frame property, frame houses, between concrete

Saturday, November 28, 2015

Benefits Of Building A Timber Frame House

If you feel that you lack the essential skills then why not enroll on a part time course. Many community colleges provide courses in basic construction skills. You could combine your theory with some practice in your own back yard.

If the log home or timber frame manufacturer are not contractors and do not actually turnkey build, how can they tell you all the cost and everything involved? They know what they do but what about the 20 other subs and the permit rules and regulations of the area you build. Custom Woodcraft Builders without a doubt recommends getting your builder involved early - at the beginning. Whoever your builder is, they cannot be involved too soon.

At least 2ft of your fence post should be sunk into the ground. This ensures the fence post is secure and offers the right kind of support for your fencing. Once the post is set into the ground you can then attach your fence panel with fencing clips.

A simple pole style barn shed, for example, can be built on a dirt floor foundation. However, this type of foundation can not be used if the shed walls will be framed.

Now if you cut, measured and built 100% correctly you should now be able to install your door jamb using packers the same size as your error margin and be able to go on and install your door. However this is highly unlikely and that's why you left room for error. You can now get the opening perfect by installing the jamb with a couple screws per side and test your door. if the opening is too small remove some packers. If the opening is too large then add some.

A cool 70s timber frame home lodge, the Austing Haus has an old-school alpine feel and sits only a little over a mile from the slopes. When driving into the ski valley, it's the first lodging you come to on the left, making it easy to find.

First, you need to decide what type of shed you want to build and what you are going to use it for. If you want to build a shed that is meant for light storage such as garden tools it won't require a strong concrete foundation. On the other hand, if you're planning to build something that is meant for heavy storage, you cannot construct it on a timber foundation.

Your home should be an attractive place where, when you have to go there, it will take you in and you will feel that you are in heaven. The gorgeous interior, the best outer shield color coat of the exterior house, the stunning decoration could make your next door neighbor jealous of you. The passerby will admire the stunning exterior decoration with eye soothing color and style. While decorating the interior, you should have the knowledge of colors for each room. The mind bending process of renovation attracts a huge no of homeowners to buy this property.

bar killer workout, workout tool

Residential solar Power Electrical - Your Free Domestic Solar Electricity

There are many fringe benefits to living in this way such as having a healthy immune system, getting a good nights sleep and feeling happy. These are always better than their alternative.

To do this put the pivot point through the loop. TIP: An easy way to do this is to unscrew the guide or runner and move it to one side, put the cable around the pivot point and re-fix the guide.

If you have a timber frame home with a thin timber external cladding your window jambs may be too narrow to house your blinds and they will have to be fitted outside the frames. Remember you don't want the blinds hitting the windows.

Georgia-Pacific makes a product called Ply-Bead that imitates old-fashioned bead board. It comes in 19/32" and 11/32" thicknesses. Suitable for both sloped and flat ceilings, the 4'x8' tongue-and-groove sheets have a pine top veneer that's milled to look like bead board.

Windows are not really essential for turning. Good artificial light will do very well and has some advantages - it is adjustable and you can angle it to show up scratches on the work. But if you want windows in your workshop, double glazing gives better insulation.

If you're building in a remote area with little manpower remember: getting a 10" thick 15 foot log can be pretty tough. Ropes, planks, pulleys and extra hands can help you accomplish it, but if you've only got one or two people imagine how much easier it is to build the same 15' long wall with 16" pieces.

Well organised storage is a great help. Everything should have its place, and be retrievable. Tools, abrasives, finishes, etc, should mainly be kept in drawers, because shelves are traps for dust and chips, and drawers are easier to access than cupboards. If you have a table saw, it is quite easy to make simple but strong plywood chests of drawers to fit odd spaces in the workshop (as long as you are satisfied with 'workshop' quality!). I recommend you number the drawers and keep an up to date alphabetical list of each item in them. Better than spending half a day hunting for a missing item.

The Broome Hut is the culmination of many years of planning, fundraising and collaboration with the US Forest Service. GHA recognizes all of its generous donors, especially Paul and Joan Broome, the Grand Foundation and the dedicated volunteers who donated more than 6,000 hours of labor to make this vision a reality. The Broome Hut operates under a Special Use Permit from the US Forest Service.

You will be able to reduce the use of electrical appliances if you live in these houses. This in turn will reduce your expenses to a certain extent. so all you have to do is buy one or hire a builder to build you one.

Now if you cut, measured and built 100% correctly you should now be able to install your door jamb using packers the same size as your error margin and be able to go on and install your door. However this is highly unlikely and that's why you left room for error. You can now get the opening perfect by installing the jamb with a couple screws per side and test your door. if the opening is too small remove some packers. If the opening is too large then add some.

prefab home construction, building companies

Friday, November 27, 2015

How To Make A Timber Beam to Secure A Window-door Opening

To give you a dollar amount would be difficult at best because it depends on the type and brand of furnace and AC you use but you can save as much as 60%.

There should be heating and perhaps air conditioning. An electric fan heater is effective and quick to take effect, but central heating would be ideal.

Kiln dried. Green. Dead standing. Moisture content. Which is better and how do I know what I am getting? There are pluses and minuses to all of the above. The key is to know and to compare apples to apples when you select a log home or timber frame manufacturer. As a building of log home and timber frame projects, Custom Woodcraft Builders really does not care what the moisture content is, we just need to know and all the logs must be the same. The key is account for any shrinkage in the building process and adjust accordingly.

Faster to assemble - timber frame home houses take much much less time to build. This is simply because they require fewer wooden pieces to develop the home frame. This means your frame could be built very quickly. For larger homes the time taken is usually between 4 to 8 days. And for medium to little homes the time taken is 2 to three days. This way you'll save lots of cash on labor costs.

In contrast, seasoned oak can take up to 7 years to be ready. In that time, the wood will dry and split and release stresses. This means that the finished look is more predictable, which is why it is also known as 'steady' oak. Steady oak is becoming increasingly popular with architects for restoration projects, but also for newer builds, because the seasoning time also improves stability.

Energy Star considers 25 percent air exchange per hour acceptable. The Wisconsin building code, and I find this amazing (and not in a good way), allows up to 50% of warm air to escape through leaks in the home every hour. This can cost the homeowner $500 to $600 annually! The Barton Designs home was found to lose only 3% and drops the lose in dollar amount to only $15 annually.

The next step is to start the design process. Many prefab manufacturers offer design services or you can work with an independent architect or designer. Once you have your land, starting the design process is one step closer to building your new home.

If you are doing a large window which requires a centre hanger for the rod. Then install each end and use a string line to locate the height for the middle support. This will ensure the rod is straight.

Lawn: It does not matter whether you are living alone or you have a family, a good lawn can always be a great addition to your garden. Prior going to build a lawn, you must know that it requires regular care as well as mowing. A lawn can be used for several purposes such as a space for your kids to play, a green area for your grandparents to have some relaxing time, or just a brilliant way to enhance the beauty of your garden. With the help of Landscape design London, you can build desirable lawn in your garden.

Lap garden fencing comes in many different heights so you can choose the right height for your garden. 6ft fence panels are the most popular because the high height offers superior safety, security and privacy. Lap garden fence panels also comes in height variations of 3ft, 4ft and 5ft too.

quality home, plus 40mm jamb, timber building

Thursday, November 26, 2015

Timber Frame Houses - Reasons to Obtain One

Lawn: It does not matter whether you are living alone or you have a family, a good lawn can always be a great addition to your garden. Prior going to build a lawn, you must know that it requires regular care as well as mowing. A lawn can be used for several purposes such as a space for your kids to play, a green area for your grandparents to have some relaxing time, or just a brilliant way to enhance the beauty of your garden. With the help of Landscape design London, you can build desirable lawn in your garden.

Thickness of the walls depends on climate. In warm areas thinner walls are acceptable, but the further north you go the thicker you need to make the walls. In some parts of Canada a two wall system (one exterior and one interior) are sometimes used.

My husbands timber frame home business was thriving prior to the economic crash but for the past two years it has barely stayed afloat. Over twenty employees got laid off, doors closed, and unemployment was our only resolution. And for two years, my husband went to work faithfully every day with trust in his heart that something good would happen. Imagine going to work for two years, feeling like you are in a ghost town, not getting paid and continuing to believe in something better!

Kiln dried. Green. Dead standing. Moisture content. Which is better and how do I know what I am getting? There are pluses and minuses to all of the above. The key is to know and to compare apples to apples when you select a log home or timber frame manufacturer. As a building of log home and timber frame projects, Custom Woodcraft Builders really does not care what the moisture content is, we just need to know and all the logs must be the same. The key is account for any shrinkage in the building process and adjust accordingly.

Construction grade oak is used for structural work. It can be obtained as an entire frame if desired. It is very strong and has been used in traditional English houses for centuries. Oak was particularly popular in Tudor times because it was a fast way to build a house.

If sheet paneling is a little daunting, there are real-wood options appropriate for a wood ceiling at any lumber yard. Look for tongue-and-groove edges that are beveled to form a V-groove. This paneling is installed board by board with adhesive and blind nailing.

The name "cordwood"comes from the material: uniform lengths of wood like the sort you'd find in a firewood stack, which, of course, is measured in "cords" and hence sometimes called "cordwood". The technique is also called "stackwall"construction or "stovewood" construction.

This is even more critical if you have a series of large windows on a long wall. Install the brackets on either end and run a string line to mark all the others. Remember a line can sag over a few metres so you may need to allow for that. Also check your height in a few places. If your floor had a hump in it, you would have to allow for that in your bracket height otherwise your curtains would drag on the floor in the middle. If this is the case you can raise your end brackets to compensate.

The first problem with timber frame homes that you should be aware of is this; most of the people who are making your kit are overcharging you for the service. Especially on the erection side. Why should you pay more for a product that should cost you less? Perception? Perhaps. But more realistically they are squeezing that last few pennies from your already overused wallet.

As your bents are raised tie each of them together with 2x6 girts and 3x6 purlins. Nail them in place with at least 16 penny nails or 3 to 4 inch deck screws. This will secure the framework of your barn while you continue raising the bents.

house design, friendly home

Timber Frame House With Tiles Flooring Creates Healthy Interior

There should be a sharpening area close to the lathe where the grinder and jigs can be used. If you want to hone the tools, ideally this should be a dedicated small bench or table at a comfortable height, with the grinder higher, nearer eye level so you can check bevel contact easily. Some people use a mobile stand, which can be convenient as long as it doesn't shake when you hone the tools.

In the UK and Ireland a timber building is normally constructed with the internal walls made from timber studding and only the very outside skin of the cavity constructed in either brick or block.

You will see just how easy it is to build your own timber frame home barn. These steps assume that you already have your foundation done and are ready to start building. These steps are designed to show you just how easy it is to construct your barn.

Georgia-Pacific makes a product called Ply-Bead that imitates old-fashioned bead board. It comes in 19/32" and 11/32" thicknesses. Suitable for both sloped and flat ceilings, the 4'x8' tongue-and-groove sheets have a pine top veneer that's milled to look like bead board.

There is also a day-use area on the east side of the building that is open to the public from 9 a.m. until one hour before sunset. A restroom and a picnic area make this a comfortable refuge for day hikers or skiers.

In contrast, seasoned oak can take up to 7 years to be ready. In that time, the wood will dry and split and release stresses. This means that the finished look is more predictable, which is why it is also known as 'steady' oak. Steady oak is becoming increasingly popular with architects for restoration projects, but also for newer builds, because the seasoning time also improves stability.

Decide whether you are going to install the blinds within the window opening or outside the opening. Inside looks neater but outside blocks light more effectively for light sleepers.

These 48" long x 6" wide planks weigh only 21 oz. each, making installation a simple, one-person job. The tongue-and-groove planks are easy to assemble, and can be attached directly to drywall or plaster with adhesive or staples.

efficient timber framed, houses for sale

Wednesday, November 25, 2015

First Steps To Planning New Home Construction

There should be a sharpening area close to the lathe where the grinder and jigs can be used. If you want to hone the tools, ideally this should be a dedicated small bench or table at a comfortable height, with the grinder higher, nearer eye level so you can check bevel contact easily. Some people use a mobile stand, which can be convenient as long as it doesn't shake when you hone the tools.

If you feel that you lack the essential skills then why not enroll on a part time course. Many community colleges provide courses in basic construction skills. You could combine your theory with some practice in your own back yard.

Decide whether you are going to install the blinds within the window opening or outside the opening. Inside looks neater but outside blocks light more effectively for light sleepers.

Nail your roof sheathing and board and batten siding in place. Use at least 8 penny ring shank nails or 2 to 3 inch deck screws. An air powered framing nail gun works great for nailing these boards in place. The air gun will make short work of an otherwise tedious job.

You can transfer the measurements of the frame construct of the bath panel by measuring the specifications of height and width. When cutting the shape of the panel (perhaps using a jigsaw) cut outside of the measurement lines - this extra surplus can be smoothed off with a hand plane to give a neat finish. Before fixing the skirting to the panel pieces, make sure you first mitre both corner ends to give a perfect appearance. Using PVA glue, attach the panel to the frame. Now that the bath panel is in place, the final task is to finish this piece of work with colours which will tone in with your bath and bathroom design with two under-coats and a top coat.

You will see just how easy it is to build your own timber frame home barn. These steps assume that you already have your foundation done and are ready to start building. These steps are designed to show you just how easy it is to construct your barn.

Do you want a full basement? Will it be a walk-out and/or finished basement? Will the basements purpose be for living space, storage or both? Using a basement for additional living space can cut the cost per square foot. Many choose to utilize a finished basement for living instead of adding to the overall dimensions of the home.

Oak beams come from a sustainable source too, making them an attractive option for ethical builders. If they are British grown oak beams, used in British building projects, the transportation costs and carbon footprint are also good.

Paving: It is a well-known fact that any type of garden can take the advantage of paved area. Generally, paved area is the starting point of every garden because it is the area where people spend most of their time. This area can be used as an 'outdoor dine area' with a barbeque, some table as well as chairs, or some new modern furniture.

house design, new home construction, shorter top jamb, quality home

Tuesday, November 24, 2015

effective Timber Framed Homes In Blowing Rock

SIPS are very strong, energy efficient, building panels. They can be used for both residential and commercial buildings. They are typically used for outer walls, floors, and roofs. The panels are made in factory controlled conditions, by "sandwiching" rigid foam insulation between two sheets or "skins" of oriented strand board (OSB). The insulation is much like the Styrofoam cups that keep hot coffee hot and cold drinks cold. Channels are cut into the foam core for the electric systems to run through. Plumbing and heating systems are installed in the interior walls, which are built in the conventional method. These panels can save you a great deal of money by saving time and labor and in the long run by saving on energy bills.

Many of the timber framed homes in Blowing Rock are built to remind people of old styles and times. People like the fact that they look elegant and stylish as well as being dependable and reliable. The wood that is used is insect resistant and not likely to rot. Once the pieces of timber are joined together, it forms a solid and integrated structure. Many excited new home builders have started writing blogs about their own personal stories online. This is a great way for you to learn more about the process. They like to write about each step and will often up date daily including many pictures to show the progress.

Well organised storage is a great help. Everything should have its place, and be retrievable. Tools, abrasives, finishes, etc, should mainly be kept in drawers, because shelves are traps for dust and chips, and drawers are easier to access than cupboards. If you have a table saw, it is quite easy to make simple but strong plywood chests of drawers to fit odd spaces in the workshop (as long as you are satisfied with 'workshop' quality!). I recommend you number the drawers and keep an up to date alphabetical list of each item in them. Better than spending half a day hunting for a missing item.

Doors and windows start by placing a frame on the wall at the lowest level of the opening, and then stacking and mortaring the cordwood to the side and then over the top of the frame. The frame can be temporary, and removed once the wall has set, or it can be the permanent frame to which the doors and windows get attached.

Decking has always been a popular choice but has become even more so in recent times. Timber is great to work with and it is fairly easy to construct a good looking deck. A decked area really ties in nicely to a stone patio or can be built on differing levels without too much of a headache. Where paving needs an area that is already level, a deck can be constructed on a timber frame home eliminating the need for labour intensive site preparation. Hardwood decking is more expensive than it's softwood alternative but the benefits are considerable. Hardwood lasts much longer and provided that you maintain it annually with oils or wood treatment it will look great for many years to come.

Kiln dried. Green. Dead standing. Moisture content. Which is better and how do I know what I am getting? There are pluses and minuses to all of the above. The key is to know and to compare apples to apples when you select a log home or timber frame manufacturer. As a building of log home and timber frame projects, Custom Woodcraft Builders really does not care what the moisture content is, we just need to know and all the logs must be the same. The key is account for any shrinkage in the building process and adjust accordingly.

Gradually we have added more solar panels to our Home Solar Power system. We started with another small panel, about 15 watts, a small inverter, rechargeable batteries for flashlights, and a rechargeable Coleman lantern. Anything that could be recharged slowly worked fine on our small system. Right now we are in the process of upgrading our battery bank and every year we add a solar panel or two. The nice part about this arrangement is that you can start to enjoy Home Solar Power in your own home by spending very little money, and adding on as you can.

door jamb, building timber frame, cord wood, between concrete blocks

Monday, November 23, 2015

Residential Solar Panel - Your Free Domestic Solar Electricity

Easy to heat or cold - Simply because you will find less pieces of wood used to make the frame it becomes simpler for heating engineers to install heating and cooling systems. These homes also have fantastic insulation properties. This is because these houses have insulated exterior sheathing.

Size of the drum. Generally the larger the drum size, that includes the rawhide surface area, timber frame home width and depth, the deeper the tone and more the tone resinates. Small drums tend to have a more sharp higher pitch. Although other factors come into effect which can affect the tune, tone and pitch, regardless of the size.

A series of grids made with special plastic is one more way of building your foundation and is becoming increasingly popular. Pea gravel is use to fill the area within the grids. A big advantage of this type of foundation is that it is easy to install and is quite durable.

If you are doing a large window which requires a centre hanger for the rod. Then install each end and use a string line to locate the height for the middle support. This will ensure the rod is straight.

Now, here's an open secret. Your attic insulation isn't going to be effective unless you get it right. Right! I say this because people are forever asking me whether to use traditional attic insulation materials - you know, the fiberglass and cellulose types - or whether to go for some type of radiant barrier.

Any plants that love well-drained soil can benefit from being grown in raised beds. You don't have to raise just vegetables. You can also easily grow herbs, fruits, and flowers in raised beds and make your job easier.

Maybe you're a music lover or a movie buff. Why not let the kids come in from the garage and practice in a specially designed music room. Or maybe you want to have the gang over for a movie night in your new home theater room. Whichever way you go, acoustics are going to be a big priority. Check with your local acoustic consultant to see what your options are, maybe you will need a cork floor to help improve the sound quality. Using wall coverings like foam panels will help to sound proof the area. Your plans should always include extra outlets, you may need them to plug in equipment like amps, recording gear, TV's, Computers and any other electrical device you may need.

jamb remember, home solar power, home made, prefab home construction

Sunday, November 22, 2015

Building Timber Frame Structures - as Well As Guidelines

Oak beams come from a sustainable source too, making them an attractive option for ethical builders. If they are British grown oak beams, used in British building projects, the transportation costs and carbon footprint are also good.

These are just a few of the things I've learned about heating our home with wood. I think even if we lived in my brand new timber frame home dream house, I'd still consider wood as a primary heat source. It's versatile, renewable (at least in our part of the world), it's been deemed 'carbon-neutral', and for me, it provides a connection to all my ancestors, who had nothing but wood to heat with.

This is even more critical if you have a series of large windows on a long wall. Install the brackets on either end and run a string line to mark all the others. Remember a line can sag over a few metres so you may need to allow for that. Also check your height in a few places. If your floor had a hump in it, you would have to allow for that in your bracket height otherwise your curtains would drag on the floor in the middle. If this is the case you can raise your end brackets to compensate.

Easy to heat or cold - Simply because there are less pieces of wood utilized to make the frame it becomes easier for heating engineers to install heating and cooling systems. These homes also have fantastic insulation properties. This is because these houses have insulated exterior sheathing.

You will soon accumulate more wood than you can use. If possible, store it outside the workshop, protected from the weather, and only bring in what is needed for current projects. If you let it, the wood pile will take over the workshop, forcing you into a cramped central space. (Don't ask me how I know this). The woodpile needs discipline.

The Broome Hut is the culmination of many years of planning, fundraising and collaboration with the US Forest Service. GHA recognizes all of its generous donors, especially Paul and Joan Broome, the Grand Foundation and the dedicated volunteers who donated more than 6,000 hours of labor to make this vision a reality. The Broome Hut operates under a Special Use Permit from the US Forest Service.

What other benefits do you get from this form of gardening? Let's see... there's the removal of soil problems, greatly improved pest and weed control, the above mentioned ease of access and the increase in your crop harvest.

How many floors do you want in your new home? Are you looking to build a home you can retire to? Most of our clients who are building a retirement will either build a one story home or design a two story home that will accommodate them as they get older.

The rammed earth construction starts by setting out the wall area. The ground is cleared off all the top soil. A trench is excavated about one foot deep. A mass concrete foundation and a short foundation wall is laid. The wall is done one foot above the ground to hold the hardcore layer. A damp proof membrane is laid on the masonry foundation. Timber form work is fixed on both sides of the wall. A holder bat is nailed to stop the timber sides from widening.

You can bolt the greenhouse directly to the concrete foundation or build a small wall on top of it first. This is useful if you want to increase the height of your greenhouse. You can also add come insulation inside the wall.

timber frame homes, oke- home solar, timber building system